Description
Meross CS11-EU smoke and carbon monoxide detector
The Meross CS11-EU is a compact yet highly effective detector with two independent sensors – a photoelectric smoke detector and an electrochemical CO concentration monitor. This solution guarantees a quick reaction in case of danger! The device is also small and discreet, and its built-in CR123A battery provides long operating time – up to about 10 years.

Instant reaction in case of danger
The detector complies with EN14604 and EN50291 standards, which confirms its effectiveness and operating quality. The device reacts automatically when the CO level reaches a dangerous value – for example, at a concentration of 300 ppm the alarm turns on in less than 3 minutes. An alarm volume exceeding 85 dB guarantees that even sleeping household members will hear the device.

Reliability and precision
If the detector detects both smoke and carbon monoxide, it first emits the smoke signal and then the CO signal. In addition, the device detects both fast- and slow-burning fires, minimizing the number of false alarms.

Simple, cable-free installation
The detector is powered by a built-in 3 V CR123A battery with a lifespan of up to 10 years. Together with the thoughtful design, this means installation takes at most a few minutes and does not require an electrician. Just screw the mounting bracket to the ceiling or wall, insert the device – and you're done!

Intuitive light indication
The Meross CS11-EU has a three-color LED that clearly indicates the device's status. Green light means ready for operation, amber means low battery or an error, and red means alarm activation or test mode. Operating the detector is extremely simple – just press one button to run a test or silence the alarm.

Thoughtful design and discretion
With its slim, white, round housing, the detector fits perfectly into any interior. Thanks to its compact dimensions, it goes unnoticed while effectively protecting you and your loved ones from invisible danger.

In the package
- Smoke and carbon monoxide detector
- Mounting bracket
- Screw set
- User manual
| Manufacturer | Meross |
|---|---|
| Model | CS11-EU |
| Certificates | EN14604:2005/AC:2008, EN50291-1:2018 |
| Sensor type | Smoke: photoelectric; CO: electrochemical; |
| Power supply | CR123A lithium battery DC 3 V (1600 mAh, non-replaceable) |
| Operating current | <30 uA (standby), <70 mA (alarm) |
| Alarm volume | 85 dB(A) from 3 m distance |
| Smoke sensitivity | 0,09–0,17 dB/m |
| CO sensitivity | 50 ppm – 60–90 min; 100 ppm – 10–40 min; 300 ppm – < 3 min; |
| Low battery level | 2.6 ± 0.1 V |
| Mute time | Approx. 10 minutes |
| Operating temperature | -10°C to 40°C |
| Operating humidity | 15-95% RH, without condensation |






Reviews
There are no reviews yet.